Description:

Key Features

One-Hand Control The FastCap 2P-10 Easy Squeeze turns a small CA glue bottle into something easier to manage with one hand, so you can place glue where you want it without fighting the bottle. Built for 2 oz Bottles It holds any 2 oz bottle of 2P-10 CA glue securely and upright, which helps keep the bottle steady between uses and cuts down on drips. Less Mess, Less Waste The squeeze frame gives you better pressure and control, especially with jel and thick adhesive, so you use less glue and make less cleanup for yourself.

Overview

The FastCap 2P-10 Easy Squeeze is a glue bottle holder and dispenser accessory made for 2 oz 2P-10 CA glue bottles. This is a glue bottle dispensing accessory designed for controlled one-handed adhesive application. Model Number: 2P-10 EASY SQUEEZE. If you use FastCap 2P-10 adhesive and want better control with less mess, this is the simple add-on that makes the bottle easier to handle.

Instead of squeezing a small bottle directly, the Easy Squeeze supports the bottle in a standing frame that lets you apply pressure more evenly. That matters most when you are working with thicker adhesive that takes more force to dispense. FastCap specifically calls this out as a good match for jel and thick viscosities, which is where a holder like this actually earns its keep.

The main benefit here is control. One-handed operation sounds minor until you are trying to hold a workpiece, line up a joint, or run a clean bead of CA glue along an edge. With the FastCap 2P-10 Easy Squeeze, the bottle stays upright when set down and feels more secure in your hand during application. That helps reduce tipping, over-squeezing, and the usual glue waste that comes from a bottle slipping around in your grip.

Design-wise, this is a straightforward shop accessory with a clear job. It holds the bottle, gives you squeeze points, and makes the bottle easier to use when it is full, partially full, or just plain awkward to press by hand. It is not trying to reinvent the adhesive system. It just solves a real annoyance for people who use 2P-10 glue regularly.

From a jobsite and bench-top standpoint, the upright storage matters more than most people think. CA glue bottles are easy to knock over, and once adhesive gets where it should not, you are wasting product and slowing yourself down. Keeping the bottle planted and ready to grab makes this a practical add-on for cabinet work, trim work, general woodworking, and quick repair tasks where fast glue access is part of the workflow.

Compatibility is simple and important: this accessory is made to hold any 2 oz bottle of 2P-10 CA glue. It is best suited to the 2P-10 jel and thick formulas, according to FastCap. Glue is not included, so this is for users who already have compatible 2P-10 bottles or plan to buy them separately.

Who should buy it? Anyone already using 2P-10 adhesive in the shop and tired of squeezing the bottle directly. Woodworkers, cabinet installers, trim carpenters, and serious DIY users will get the most out of it, especially if they use thicker CA glue and want cleaner application with less waste. It is a small accessory, but it fixes a real daily-use problem.

Get Better Glue Control

The whole point of this accessory is making glue application easier to manage. When you can squeeze with one hand and keep the bottle steady, it is easier to lay down a controlled bead instead of flooding the workpiece.

• Designed for one-handed squeeze operation
• Helps reduce mess and wasted adhesive
• Useful when positioning parts during quick glue-ups

Made for Thick 2P-10 Bottles

This accessory is built around the 2 oz 2P-10 bottle format, and FastCap calls out jel and thick viscosities as the sweet spot. If those bottles feel awkward or hard to press by hand, this gives you better leverage and a more stable grip.

• Holds any 2 oz bottle of 2P-10 CA glue
• Best for jel and thick viscosities
• Keeps the bottle secure and upright between uses

What's in the Box

• (1) FastCap 2P-10 Easy Squeeze bottle holder

Glue bottle not included.

Key Specifications

Compatibility

Adhesive Bottle Fit Designed to hold any 2 oz bottle of FastCap 2P-10 CA glue. Best Adhesive Type FastCap identifies jel and thick 2P-10 viscosities as the best match for this dispenser accessory.

Built For

Woodworking Cabinet Installation Trim Work Shop Repairs Bench Assembly DIY / Hobbyist

Pro Tip

This is especially useful once a 2P-10 bottle is partially used and gets harder to squeeze cleanly. Drop the bottle into the Easy Squeeze before that point and you will get more consistent glue flow with less hand fatigue.

Tool Nut's Take

Tool Nut's Take

FastCap 2P-10 Easy Squeeze Fixes an Annoying Little Problem

The FastCap 2P-10 Easy Squeeze is the kind of simple shop accessory that makes immediate sense the first time you use thick CA glue with one hand.

• Who it's for: Anyone already using 2 oz 2P-10 glue bottles for woodworking, trim installs, cabinet work, or quick repairs.
• Why it stands out: It gives you better squeeze control, keeps the bottle upright, and works especially well with jel and thick formulas that are harder to dispense cleanly.
• Worth knowing: This is just the holder. Glue is sold separately, so it makes the most sense for users already bought into the FastCap 2P-10 system.

Common Questions

• What is the FastCap 2P-10 Easy Squeeze designed to do? It holds a 2 oz 2P-10 CA glue bottle so you can dispense adhesive with better one-handed control.
• What adhesive works best with it? FastCap states it is ideal for 2P-10 jel and thick viscosities.
• Does it keep the bottle upright? Yes. One of its main functions is keeping the glue bottle secure and upright between uses.
• Is glue included? No. The Easy Squeeze is sold by itself.