Description:

The Vessel Tool SLH21U is an 11-piece 2 Way-Speed L-Handle set that switches between a tilting 1/4-in socket driver and a solid 1/4-in bit holder with a single push-pull collar - no swapping handles. The long arm delivers strong tightening torque, and the smooth rotating sleeve lets you run fasteners fast without lifting your palm. It comes ready to work with 5 color-coded metric sockets and 5 JIS Drive-compatible driver bits sized for common automotive and assembly tasks.

• Push-pull collar switches between a 1/4-in tilt socket on the long arm and a 1/4-in solid bit holder on the short arm, giving you two drive modes in one handle
• 15-degree tilt on the socket side improves access to angled or partially obstructed fasteners
• Smooth rotating sleeve near the grip end allows rapid finger-spinning without releasing the handle
• Color-coded sockets cover five common metric sizes (H8, H10, H12, H13, H14) for quick identification without reading engravings
• JIS Drive-compatible Phillips bits (PH1, PH2, PH3) engage reliably on Japanese industrial screws as well as standard Phillips heads
• Alloy steel construction at 7-3/8" (188 mm) overall length and 0.70 lb keeps the tool compact and light for one-handed use in tight spaces

The SLH21U L-Handle from Vessel Tool delivers the mechanical advantage of an L-shaped wrench combined with a dual-function 1/4-in drive system. Pushing the collar engages a tilting socket adapter on the long arm for torque-heavy work, while pulling it activates the solid bit holder on the short arm for driving screws. This makes it a capable single-tool solution for jobs that mix socket fasteners and Phillips or slotted screws in the same workspace.

The handle is constructed from alloy steel with a knurled rotating sleeve positioned near the grip. That sleeve lets you maintain firm downward pressure while spinning the handle freely with your fingers, which noticeably speeds up driving on long runs of fasteners. The five included sockets are each color-banded by size so you can grab the right one at a glance, and the five driver bits are seated in a separate bit holder rail for organized storage. The bits conform to JIS Drive standards, meaning they seat flush in JIS screw heads and also work on standard Phillips fasteners without cam-out risk.

This set is well-suited for automotive service, appliance repair, and light assembly work where a full-size ratchet is too bulky. The H8-through-H14 socket range and PH1-through-PH3 bit selection cover the fastener sizes most frequently encountered in engine bays, body panels, and interior trim - making the SLH21U a practical addition to any mobile or shop hand tool kit.

Includes:

• (1) 2 Way-Speed L-Handle with Rotating Sleeve (7-3/8-in overall length)
• (5) 1/4-in SQ Metric Sockets: H8, H10, H12, H13, H14
• (5) 1/4-in HEX Driver Bits: PH1, PH2, PH3, SL4, SL6