Description:

Key Features

11-Piece Fastening Set The Vessel IB11P02U Impact Ball bit set gives you the common drive styles in one compact holder, so you can cover Phillips, slotted, square, Torx, and a bit holder without digging through loose bits. Built for Impact Drivers This impact driver bit set is made for impact use, with a torsion design that helps absorb shock instead of passing every hit straight into the bit. Hard Bit Material With stated hardness up to 62 HRC, these bits are built to handle repeated fastening work where cheaper bits tend to twist, round off, or wear early.

Overview

Vessel IB11P02U Impact Ball 11-Piece Impact Driver Bit Set is a compact multi-bit fastening set from Vessel Tool built for impact driver users who want the most common tip styles in one pocket-size case. This is a bit set designed for impact driving and general fastening. Model Number: IB11P02U.

What stands out here is the mix of bits. Instead of loading the case with filler sizes, Vessel keeps it practical: one slotted bit, three Phillips bits, one square bit, five Torx bits, and a 2" (50 mm) bit holder. That gives you coverage for everyday repair, installation, cabinet hardware, electrical covers, light mechanical work, and general jobsite fastening without hauling a full-size case.

The set is specifically marked for impact driver use, which matters if you regularly run screws with a cordless impact instead of a standard drill driver. Impact tools hit harder and more suddenly, so a regular bit can chip or twist faster under that kind of load. Vessel uses a torsion zone design to absorb shock during fastening, helping reduce stress at the bit under repeated impact.

Bit hardness is listed at 62 HRC, which is a real buying spec, not fluff. For the user, that means the bit material is built to resist wear and deformation when you are driving fasteners all day. Hardness alone is not the whole story, but paired with the torsion design it tells you this set is aimed at actual impact-driver work, not just occasional household use.

The form factor is another strong point. The Impact Ball holder is small enough to live in a pocket, pouch, or drawer, and the rotating case keeps the bits organized instead of letting them scatter around the bottom of your bag. If you switch between screw types often, that saves more time than you would think. The 1/4 inch interface also keeps it compatible with standard quick-change chucks and the included holder gives you added reach when needed.

Vessel also gives this set broad real-world usefulness by covering the drive styles trades actually run into. Phillips bits handle common wood and sheet metal screws, the slotted bit covers basic service hardware, the square bit helps with construction and utility fasteners, and the Torx range is useful for equipment, fixtures, and hardware where cam-out resistance matters. That spread makes this a solid everyday carry bit set rather than a specialty pack.

If you are the kind of user who wants a compact impact driver accessory that travels easily and still covers the basics, this is a smart setup. It makes the most sense for techs, installers, maintenance crews, electricians, carpenters, and serious DIY users who need a small but capable fastening kit ready to go.

Compact Storage That Stays Useful

The case is the point here. You get a compact bit set that is easy to carry, easy to open, and much less likely to turn into a pile of loose bits in your tool bag.

• 11-piece configuration keeps common fastening bits in one holder
• Compact folding design is built for pocket, pouch, or service bag carry

Made to Handle Impact Driving

Impact drivers hit fast and hard. The torsion zone is there to take some of that shock, which can help the bit survive repeated fastening better than a rigid standard bit.

• Torsion zone design helps absorb impacts during driving
• Marked for impact driver use

What's in the Box

• (1) Slotted bit, 1-3/16" (30 mm), Slotted #6
• (1) Phillips #1 bit, 1-3/16" (30 mm)
• (1) Phillips #2 bit, 1-3/16" (30 mm)
• (1) Phillips #3 bit, 1-3/16" (30 mm)
• (1) Square #2 bit, 1-3/16" (30 mm)
• (1) Torx T10 bit, 1-3/16" (30 mm)
• (1) Torx T15 bit, 1-3/16" (30 mm)
• (1) Torx T20 bit, 1-3/16" (30 mm)
• (1) Torx T25 bit, 1-3/16" (30 mm)
• (1) Torx T30 bit, 1-3/16" (30 mm)
• (1) BH-2 bit holder, 2" (50 mm)

Key Specifications

Compatibility

Bit Interface Uses a standard 1/4 inch hex bit interface for impact drivers and quick-change bit holders. Tool Match Designed for impact driver use.

Built For

General Fastening Construction Electrical Maintenance Installation Work Service Techs DIY / Hobbyist

Pro Tip

Keep this set in your tool pouch as a first-grab fastener kit, then swap to longer specialty bits only when the job calls for them. The included 2" (50 mm) holder gives you a little more reach without giving up the compact carry size of the set.

Tool Nut's Take

Tool Nut's Take

Vessel IB11P02U Impact Ball 11-Piece Impact Driver Bit Set for everyday carry

This is the kind of compact bit set that actually earns a permanent spot in your bag because it covers the common screw types and is built for impact-driver use.

• Who it's for: Pros and serious DIY users who want a small, reliable fastening kit for service calls, punch-list work, install jobs, and general repairs.
• Why it stands out: You get impact-ready bits, a torsion design to handle shock, 62 HRC hardness, and a smart mix of common tips instead of wasted filler sizes.
• Worth knowing: This is a compact 30 mm bit set, so it is best as a carry-everywhere solution, not a replacement for a full range of long-reach or specialty bits.

Common Questions

• Is this set made for an impact driver? Yes. The packaging states it is for impact driver use.
• What size shank do the bits use? The set uses a 1/4 inch interface.
• How long are the bits? The bits are 1-3/16" (30 mm) long, and the included bit holder is 2" (50 mm) long.