Description:

Key Features

JAWSFIT Grip The Cross-Point JAWSFIT tip bites into Phillips #2 screws more securely, which helps reduce cam-out and makes it easier to keep the driver planted when the screw fights back. Tang-Thru Build The tang-thru shank runs through the handle to a large steel cap, so this screwdriver is built for light striking when you need extra persuasion on stuck fasteners. More Turning Power A hex bolster near the shank lets you add a wrench for extra torque, giving this Vessel screwdriver more leverage than a basic shop driver.

Overview

The Vessel 930P2100 Megadora Tang-Thru Screwdriver is a Phillips #2 manual screwdriver built for maintenance work, repair work, and general fastening where a standard driver is not enough. This is a screwdriver designed for driving and loosening Phillips #2 screws with better tip engagement and added striking support. Model Number: 930P2100.

What matters most here is the tip. Vessel uses its Cross-Point JAWSFIT profile to hold the screw more firmly, which helps cut down on slipping and stripped heads. On the job, that means better control when you are working in equipment, panels, fixtures, or stubborn assemblies where a loose-fitting tip can waste time fast.

This is not just a regular screwdriver with a nicer handle. The tang-thru construction gives you a steel-capped end and a shank that runs through the handle, so the tool is made to take light hammer taps when needed. If you deal with seized screws, painted-over screws, or fasteners that need a little shock before they move, that design makes a real difference.

Vessel also adds a hex bolster for wrench assist. That gives you another option when hand force alone is not enough. Put a wrench on the bolster and you can add controlled turning force without abusing the handle. That is a practical feature for fleet and plant maintenance, where screws are often tight, dirty, or set in place for years.

The proportions are useful for everyday carry in a tool bag or service pouch. With a 100 mm shank length, 6.4 mm shank diameter, 1-5/16" (34 mm) grip diameter, and 8-3/8" (213 mm) overall length, it has enough reach for common access points without feeling oversized. The grip is built around control and comfort, which matters when you are running a lot of screws in a day or breaking them loose one by one.

The shank is listed as chrome vanadium alloy steel and specially hardened, which lines up with what you would expect from a professional-grade maintenance screwdriver. That matters because a tang-thru driver takes more abuse than a simple bench screwdriver. Better steel and proper hardening help the tip hold its shape and the shaft hold up under torque.

If you want a screwdriver for cabinet installs or ultra-delicate finish work, this may be more tool than you need. If you need a service screwdriver that can grip screws well, take some abuse, and give you extra leverage when things get ugly, this one makes a lot more sense. It is especially well suited for technicians, mechanics, plant maintenance crews, and serious DIY users who want one dependable Phillips #2 screwdriver instead of a throwaway set piece.

Built to Stay Engaged Under Load

This driver is made for real fastening work, not just light household use. The combination of the JAWSFIT tip, tang-thru shank, and wrench-ready bolster gives you better control when screws are tight, worn, or stubborn.

• Phillips #2 tip with JAWSFIT profile for improved screw engagement
• Tang-thru shank with large steel cap for light striking support
• Hexagonal bolster adds torque with a wrench when needed
• 100 mm shank gives practical reach for common service work

Key Specifications

Built For

Fleet Maintenance Plant Maintenance Mechanical Repair General Service Work Equipment Maintenance DIY / Hobbyist

Pro Tip

If a Phillips #2 screw is stuck, seat the tip fully first, then give the steel cap a light tap before turning. On a tang-thru driver like this, that shock can help break the fastener loose without chewing up the screw head.

Warranty & Support

3 year warranty on material and workmanship.

Tool Nut's Take

Tool Nut's Take

Vessel 930P2100 Megadora Tang-Thru Screwdriver Means Business

This is the kind of Phillips driver you buy when you are tired of tips slipping and handles folding under real work.

• Who it's for: Techs, mechanics, maintenance crews, and serious DIY users who want a dedicated Phillips #2 screwdriver for service and repair work.
• Why it stands out: The JAWSFIT tip, tang-thru construction, and wrench-ready bolster give it more grip and more problem-solving range than a basic screwdriver.
• Worth knowing: This is a single-purpose manual driver, not a multi-bit tool. If Phillips #2 is the screw you run into all the time, that is exactly why it works so well.

Common Questions

• What size screw is this driver made for? It uses a Phillips #2 tip.
• Can this screwdriver be struck with a hammer? Yes. It has a tang-thru shank and a large steel cap for light striking support.
• Does it offer extra leverage beyond the handle? Yes. The screwdriver has a hexagonal bolster that can be turned with a wrench for added torque.
• Where is it made? It is made in Japan.