Description:

Key Features

3 Speed Control Pick from 280, 340, or 400 RPM with matching electric torque levels. That gives you better control on small screws and more pace when you are running a lot of fasteners. Power Plus Manual Use electric drive for quick run-down, then finish by hand when feel matters. It delivers up to 17.7 in-lbs powered torque and withstands up to 88.5 in-lbs in manual use. Compact USB Screwdriver The Vessel 220USBP5U e-ASSIST Screwdriver packs a built-in 3.6V lithium-ion battery, LED work light, and USB Type-C charging into a compact hand screwdriver format.

Overview

The Vessel 220USBP5U e-ASSIST Screwdriver is a rechargeable electric-assist screwdriver built for faster fastening with the control of a hand tool. This is a cordless screwdriver designed for light-duty fastening, assembly, and service work. Model Number: 220USBP5U. If you want something quicker than a manual screwdriver but more controlled than a full-size drill driver, this is the lane it fits.

What makes this tool useful is the mix of powered and manual operation. The motor gives you three output levels: 10.6, 14.2, and 17.7 in-lbs, paired with 280, 340, and 400 RPM. That means you can run screws down quickly without overdoing it on smaller hardware. Then, because it is still a hand screwdriver at heart, you can switch to manual turning for final snugging and better feel at the end of the drive.

The handle layout is built around one-handed control and short-run fastening. A high-brightness LED helps when you are working inside panels, cabinets, equipment housings, or other low-light spots. The overall length is 5-13/16" (147 mm), and the tool weight is listed at about 0.6 lb, so it stays easy to carry in a pouch or keep on a bench without feeling like overkill for small fasteners.

Power comes from a built-in 3.6V 800mAh lithium-ion battery, and charging is through USB Type-C. That is a practical setup for techs, installers, and anyone already carrying Type-C charging gear. It cuts down on proprietary charging clutter and makes topping the tool off between jobs simple. Charge time is listed at 60 minutes.

On the bit side, the Vessel 220USBP5U e-ASSIST Screwdriver uses a 1/4" (6.35 mm) hex interface, which is the standard 1/4 inch hex format most users want for quick bit swaps. It is designed to work with 1/4 inch hex power bits or double-ended bits, with one important note from the manufacturer data: the Japanese 1/4 inch hex standard is not applicable. That matters if you already have a pile of bits and want to know what drops right in.

Vessel also includes practical jobsite details that make sense on a tool this size. There is a lanyard attachment hole to help prevent drops when you are on a ladder, working around equipment, or moving through service calls. The ergonomic grip and compact body make it well suited for repetitive fastening where a larger driver would be clumsy.

Who should buy it? This tool makes the most sense for electricians, maintenance techs, installers, cabinet and hardware assembly users, and serious DIYers who spend time driving a lot of small to medium screws. It is not trying to replace a heavy-duty impact driver. It is for the work in between: faster than a manual driver, more precise than a drill, and easier to control when stripped heads or delicate hardware would cost you time.

Compact Control for Everyday Fastening

This is the kind of driver you grab when a drill feels too aggressive and a manual screwdriver feels too slow. The three-speed setup gives you a better match for the screw and material, while the hand-driver form keeps control right where you want it.

• Three no-load speeds: 280, 340, and 400 RPM
• Powered torque up to 17.7 in-lbs with manual torque up to 88.5 in-lbs
• Built-in LED light for tighter, darker work areas

What's in the Box

• (1) Vessel 220USBP5U e-ASSIST Screwdriver
• (5) Impact Ball Torsion Bits
• (1) Built-in 3.6V 800mAh lithium-ion battery

Charges through USB Type-C. A wall adapter is not specified.

Key Specifications

Compatibility

Bit Interface Uses a 1/4" (6.35 mm), hex shank. Bit Types Interchangeable with 1/4 inch hex power bits and double-ended bits. Charging Recharges through a USB Type-C port using a 5V USB charger.

Built For

Electrical Maintenance Equipment Service Hardware Assembly Cabinet and Fixture Work DIY / Hobbyist

Pro Tip

Use the motor to run the screw most of the way in, then finish by hand with the same tool. That is where this driver earns its keep, especially on cover plates, device screws, and hardware where over-tightening makes more work for you.

Warranty & Support

6-month warranty.

Tool Nut's Take

Tool Nut's Take

Vessel 220USBP5U e-ASSIST Screwdriver for faster small-fastener work

This is a smart pick for anyone who drives lots of screws and wants more speed without giving up hand-tool control.

• Who it's for: Techs, electricians, installers, assembly users, and DIYers doing repeated fastening on smaller hardware.
• Why it stands out: The electric-assist setup, three speed levels, USB Type-C charging, and manual finish capability make it more practical than a basic cordless screwdriver.
• Worth knowing: This is not a substitute for an impact driver. It is best when precision and pace matter more than brute force.

Common Questions

• Is this a cordless screwdriver? Yes. It has a built-in 3.6V lithium-ion battery and charges through USB Type-C.
• Can it be used as a manual screwdriver too? Yes. It is designed for powered run-down and manual final tightening, with manual torque up to 88.5 in-lbs.
• What bit style does it use? It uses a 1/4" (6.35 mm), hex shank and is compatible with 1/4 inch hex power bits and double-ended bits.
• Does it have multiple speed settings? Yes. It has three speed settings: 280, 340, and 400 RPM.