Description:

Key Features

Clean Tile Cuts The continuous rim is built to reduce chipping, which matters when you're cutting visible porcelain and ceramic tile that cannot be patched later. Wet or Dry Use this diamond tile blade for wet cutting or dry cutting depending on the jobsite setup, so you can keep moving whether you're in a finished space or outside at the saw. Made for Compact Cut-Off Work The Milwaukee 49-94-3010 3 Inch Diamond Tile Blade is sized for the Milwaukee M12 FUEL 3 inch Compact Cut Off Tool, giving you better control for notch cuts, rounded cuts, and trim work in tight spots.

Overview

The Milwaukee 49-94-3010 3 Inch Diamond Tile Blade is a compact diamond blade for tile work built for clean, controlled cutting in ceramic and porcelain. This is a diamond tile blade designed for cutting wall tile and floor tile with a compact cut-off tool. Model Number 49-94-3010. If you are doing detail cuts, edge cleanup, or small fitment cuts where a full-size wet saw is overkill, this blade makes a lot of sense.

What matters here is control. The 3 inch diameter gives you a blade that is easier to maneuver for notch cuts, rounded cuts, and trimming around outlets, corners, and tight finished areas. On tile work, that kind of control is the difference between a clean fit and a wasted piece. Milwaukee also rates this blade for wet or dry use, so it fits both quick adjustment cuts and more heat-managed cutting setups.

The continuous rim is the right choice for tile because it is built to cut smoother and chip less than a segmented blade. Milwaukee calls out ultimate precision in porcelain and minimized chipping, which is exactly what most buyers want from a tile blade. The vented steel core helps the blade run cooler while staying more stable through the cut, which supports cleaner results on hard materials like porcelain.

This blade is made for use with the Milwaukee M12 FUEL 3 inch Compact Cut Off Tool, model 2522, and uses a 3/8 inch arbor. That combination makes it a practical accessory for installers and remodelers who want a compact cutting setup instead of dragging out a larger tile saw for every small cut. The maximum speed rating is 20,000 RPM, so it is built around high-speed compact cut-off applications rather than general-purpose saw use.

In terms of material range, it is specifically made for ceramic tile and porcelain tile, and is also suited to marble and granite. The core use case is still tile work, especially where precision matters more than brute force. Whether you are trimming a porcelain floor tile to fit a doorway or cutting a ceramic wall tile around a fixture, this blade is meant to leave a cleaner edge and better-looking finish.

Who should buy it? Tile installers, remodelers, plumbers, electricians, and serious DIYers doing finish work will get the most out of it. If you already own the Milwaukee M12 FUEL 3 inch Compact Cut Off Tool and need a dedicated blade for tile, this is the right match. If your work is mostly detailed tile cutting rather than long production cuts on a large saw table, this blade is the more practical setup.

Better Control for Detail Cuts

The smaller 3 inch blade size is useful when you need to steer the cut instead of just powering straight through material. That makes it a strong choice for trim cuts, curved sections, and tight access work around installed tile.

• 3 inch blade diameter for compact, maneuverable cutting
• Designed for notch cuts and rounded cuts in tile
• 3/8 inch arbor fits the intended compact cut-off platform

Built to Cut Tile Cleaner

Tile blades live or die by edge quality. Milwaukee pairs a continuous rim with a vented steel core here, which is aimed at smoother cuts, less chipping, and better heat control when working through hard porcelain.

• Continuous rim helps reduce edge chipping
• Vented steel core is built for cooler, more precise cuts
• Rated for wet cutting or dry cutting depending on the job

What's in the Box

• (1) Milwaukee 49-94-3010 3 Inch Diamond Tile Blade

Key Specifications

Compatibility

Tool Platform Designed for use with the Milwaukee M12 FUEL 3 inch Compact Cut Off Tool, model 2522 and 2522-20. Blade Mount Uses a 3/8 inch arbor interface. Application Match Built for wet or dry cutting in ceramic tile and porcelain tile.

Built For

Tile Installation Remodeling Bathroom Renovation Kitchen Backsplash Work Plumbing Finish Cuts Electrical Cutouts Porcelain Tile Cutting Ceramic Tile Cutting

Pro Tip

If you're fitting around outlets, corners, or small pipe penetrations, use this 3 inch blade for the relief and detail cuts, then finish the edge in short passes instead of forcing the whole cut at once. You'll keep the tile edge cleaner and put less heat into the blade.

Warranty & Support

No manufacturer's warranty is listed.

Tool Nut's Take

Tool Nut's Take

Milwaukee 49-94-3010 3 Inch Diamond Tile Blade for precise tile work

This is the kind of blade you buy when edge quality matters more than brute cutting speed.

• Who it's for: Anyone running the Milwaukee M12 FUEL 3 inch Compact Cut Off Tool for tile work, especially installers and remodelers making detail cuts in porcelain or ceramic.
• Why it stands out: The continuous rim, wet or dry capability, and compact 3 inch size make it a practical blade for clean finish work where larger tile saw setups are clumsy.
• Worth knowing: This is a specialty blade for tile applications, not a do-everything cut-off wheel. If your main job is detailed tile fitting, that's exactly why it earns a spot in the bag.

Common Questions

• Can this blade be used for wet and dry cutting? Yes. It is suitable for both wet and dry use.
• What tool is this blade designed to fit? It is designed for the Milwaukee M12 FUEL 3 inch Compact Cut Off Tool, model 2522.
• What materials is it intended to cut? It is made for ceramic tile and porcelain tile, and also tile applications including marble and granite.
• What is the maximum RPM rating? The blade is rated for a maximum speed of 20,000 RPM.