Description:

Key Features

One Blade, Many Materials This Milwaukee carbide abrasive blade is built for general purpose cutting in drywall, fiber cement, PVC, plastic, laminate, tile, wood, and metal. That means fewer wheel changes when the job keeps shifting from one material to the next. Runs Up to 20,000 RPM The blade is rated for a maximum 20,000 RPM, so it is matched for high-speed cutoff work with the right compact cutoff tool. It cuts fast while keeping the edge working consistently through abrasive materials. Fits the 2522 Platform Made for the Milwaukee M12 FUEL 3 inch Compact Cut Off Tool with a 3/8 inch arbor. If you already run the 2522, this is the purpose-built wheel for clean, controlled dry cutting.

Overview

The Milwaukee 49-94-3005 Carbide Abrasive Blade is a 3 inch cutoff blade built for the Milwaukee M12 FUEL 3 inch Compact Cut Off Tool. This is a carbide abrasive blade designed for general purpose dry cutting across a wide range of jobsite materials. Model Number: 49-94-3005. If you need one wheel that can move from drywall to fiber cement to PVC without stopping to swap accessories, this is the one Milwaukee built for that job.

What matters here is versatility. Milwaukee positions this blade as a general purpose option for drywall, cement board, plastics, PVC, laminate, tile, wood, metal, and ductile material. On the job, that means it is a good fit for punch-list work, remodel cuts, and service tasks where you are not spending all day in one material. Instead of keeping a stack of single-purpose abrasive wheels nearby, you can load one blade that handles a broad mix of common cuts.

The carbide abrasive construction is there for a reason. Compared to basic abrasive wheels, this style is meant to improve cutting performance, extend blade life, and maintain diameter longer as it wears. That last part matters more than it sounds. A wheel that holds its diameter gives you more consistent cutting depth and a more predictable feel through the life of the accessory, especially when you are making repeated shallow cuts in board, panel, or trim material.

This blade is sized at 3 inches in diameter with a 3/8 inch arbor and a maximum speed rating of 20,000 RPM. It is intended for dry use only, which makes it well suited for quick interior and exterior cutoff work where you want control, portability, and less setup. Paired with the Milwaukee 2522 compact cutoff tool, it is a practical setup for cutting fiber cement siding, drywall patches, plastic pipe, and similar materials in place.

Who should buy it? Contractors, remodelers, siding crews, plumbers, electricians, and serious DIY users who already own the Milwaukee M12 FUEL 3 inch Compact Cut Off Tool. If you want a dedicated blade for material variety instead of chasing maximum speed in one narrow application, the Milwaukee 49-94-3005 Carbide Abrasive Blade makes a lot of sense. It is a simple accessory, but it solves a real problem: getting through mixed-material cuts without wasting time on constant blade changes.

Handle Mixed-Material Cutoffs Without Constant Blade Changes

This blade is made for the kind of work where material changes from one cut to the next. Instead of swapping accessories every time you move from board to plastic or tile, you can keep working with one general purpose cutoff wheel.

• General purpose blade for drywall, cement board, PVC, plastics, and other common jobsite materials
• Also listed for use in metal, wood, masonry, laminate, fiber cement, ductile, and tile

Keep Cuts Consistent as the Blade Wears

Carbide abrasive construction helps this wheel keep working longer than a standard abrasive option. The payoff is more predictable cutting feel and less drop-off in performance over the life of the blade.

• Carbide grit is designed to improve cutting performance and extend blade life
• Milwaukee highlights maintained diameter and reduced debris compared to standard abrasive wheels

Milwaukee 49-94-3005 Carbide Abrasive Blade Fit and Speed

The numbers are straightforward, and they matter. This blade is sized specifically for Milwaukee's 3 inch compact cutoff setup, so you get the correct fit and the speed rating needed for that tool platform.

• 3 inch blade diameter with 3/8 inch arbor hole size
• Maximum speed rating of 20,000 RPM

What's in the Box

• (1) Milwaukee 49-94-3005 Carbide Abrasive Blade

Compact cutoff tool sold separately.

Key Specifications

Compatibility

Tool Compatibility Designed for use with the Milwaukee M12 FUEL 3 in. Compact Cut Off Tool, model 2522 and 2522-20. Blade Interface Uses a 3/8 in. arbor connection. Blade Size Built in a 3 in. diameter format for compact cutoff tool applications.

Built For

Remodeling General Contracting Plumbing Electrical Siding and Fiber Cement Work Drywall Tile and Laminate Cutoffs DIY / Hobbyist

Pro Tip

If you are using the Milwaukee 2522 for punch-list work, keep this blade loaded when the day includes a mix of drywall, plastic, and fiber cement. It is a smart way to avoid blade swaps, but remember it is rated for dry use only.

Warranty & Support

No manufacturer's warranty is listed for this blade.

Tool Nut's Take

Tool Nut's Take

The Blade You Keep Handy for Random Jobsite Cuts

The Milwaukee 49-94-3005 Carbide Abrasive Blade is the kind of accessory that earns its spot because it handles a broad range of materials without a lot of fuss.

• Who it's for: Anyone running the Milwaukee M12 FUEL 3 inch Compact Cut Off Tool who needs one practical blade for remodel work, service calls, punch lists, and quick cutoff jobs.
• Why it stands out: The big win is versatility. You get carbide abrasive construction, a 20,000 RPM rating, and a blade meant to keep its diameter better than a standard abrasive wheel.
• Worth knowing: This is not a universal blade for every 3 inch tool. It is made around the Milwaukee 2522 setup, and it is for dry use only.

Common Questions

• What tool is this blade designed for? It is designed for the Milwaukee M12 FUEL 3 in. Compact Cut Off Tool, model 2522 and 2522-20.
• What size is the blade? The blade is 3 inches in diameter with a 3/8 inch arbor.
• What materials can it cut? Milwaukee lists it as a general purpose blade for materials including drywall, fiber cement, PVC, plastic, laminate, tile, wood, metal, and masonry-related applications.
• Is it rated for wet cutting? No. It is for dry use only.
• What is the maximum RPM rating? The maximum rated speed is 20,000 RPM.