Description:

Key Features

Screw Covers That MatchThe FastCap Hole Punch Kit punches screw covers out of your own edge banding or veneer, so the covers match the cabinet exactly.Three Steel Dies3/8-inch, 9/16-inch and 18 mm precision steel dies cover the common screw cover sizes.Complete Covering SystemIncludes the FlushMount drill bit system, PowerHead screws and SpeedTape to set the screw and stick the cover.

Overview

The FastCap Hole Punch Kit (Model Number: HOLE PUNCH KIT) is a manual punch system for making custom screw covers. This is a hand punch designed for cutting screw covers from your own edge banding or veneer so exposed screws in cabinets and casework disappear into the finish.

Stock screw caps rarely match a specific wood species or color. This kit lets you punch covers from the same banding or veneer used on the job. It handles material up to 0.022 inch thick. It is not intended for plastic laminate.

The manual punch takes three precision steel dies: 3/8 inch, 9/16 inch and 18 mm. An extra bushing is included. The FlushMount drill bit system drills a hole sized and deep enough for a PowerHead screw and its cap to sit flush, and a 1-inch x 50-foot roll of SpeedTape double-sided tape attaches the punched covers.

Everything stores in a hard shell case. Cabinet installers, closet builders and furniture makers who leave screws exposed inside casework will get the most out of it.

What's in the Box

• (1) Hole punch tool with extra bushing
• (1) 3/8 in. die
• (1) 9/16 in. die
• (1) 18 mm die
• (1) FlushMount drill bit system
• PowerHead screws
• (1) Roll SpeedTape, 1 in. x 50 ft.
• (1) Hard shell case

Key Specifications

Built For

Cabinet InstallationCabinet MakingCloset SystemsFurniture BuildingWoodworking

Tool Nut's Take

Tool Nut's Take

Make Screw Heads Disappear

The FastCap Hole Punch Kit turns leftover edge banding into screw covers that match the job exactly.

• Who it's for: Cabinet and closet installers who want exposed screws to vanish.
• Why it stands out: Three dies, the FlushMount bit, PowerHead screws and SpeedTape in one case.
• Worth knowing: Max thickness is 0.022 inch and it is not for plastic laminate. The Pro kit adds a ratcheting punch and carbide cutters.