Description:

Key Features

Clean Crosscuts The 60-tooth ultra finish tooth count is built for smooth, chip-free results in plywood, melamine, oak, pine, and delicate molding, so you spend less time cleaning up edges or sanding. Built to Hold an Edge TiCo high-density carbide, tri-metal shock-resistant brazing, and a hardened steel body work together to keep the blade cutting clean even under tough jobsite use. Thin-Kerf Circular Saw Blade This Diablo finish blade uses a super thin laser-cut kerf to cut fast while keeping resistance down, which helps both corded and cordless circular saws stay efficient through finish work.

Overview

The Diablo D0760A 7-1/4 in. x 60-Tooth Ultra Finish Saw Blade is a wood-cutting circular saw blade built for clean, finished crosscuts in sheet goods, trim stock, and fine wood materials. This is a circular saw blade designed for ultra-finish wood cutting and crosscutting. Model Number: D0760A. If you want a blade for cabinet-grade results instead of rough framing cuts, this is the kind of blade you reach for.

What matters most here is the combination of a 7-1/4 inch diameter and 60 ATB teeth. That tooth count is aimed at smoother cuts in oak, pine, melamine, veneer plywood, laminate, fiber board, and delicate molding. In plain terms, the higher tooth count helps reduce tear-out and leaves a cleaner edge, especially when the material surface needs to stay presentable right off the saw.

Diablo also builds this blade around TiCo high-density carbide, which is tuned for the application instead of being a generic carbide tip. That matters because finish blades live or die by edge quality. A blade that stays sharp longer keeps cut quality consistent, and that means fewer surprise chips halfway through a job. The hardened steel body supports that by helping the blade stay stable and usable over time.

The super thin laser-cut kerf is another jobsite advantage. A .059 inch kerf means the blade removes less material as it cuts, which helps the saw cut faster and with less drag. On a corded saw that means smoother feed. On a cordless saw it usually means the saw works less hard for the same cut, which is exactly what you want when you're doing repeated finish cuts and trying to keep runtime up.

Diablo adds Perma-SHIELD non-stick coating to help protect against heat, gumming, and corrosion. That is not just a cosmetic extra. When you are cutting resinous wood or working in conditions where buildup becomes a problem, a coated blade is easier to keep performing consistently. Less pitch buildup also helps maintain cut quality over time. The tri-metal shock-resistant brazing is there to help the carbide tips hold up under impact, which is a practical durability feature for blades that see real jobsite handling instead of living in a cabinet shop only.

Fitment is straightforward: this blade uses a 5/8 inch arbor and is marked for corded and cordless saws. The maximum rated speed is 8,000 RPM, so it is intended for circular saw setups that match that spec. It is a strong choice when your priority is crosscut quality and finish-ready edges, not aggressive ripping speed in framing lumber all day.

Who should buy it? Cabinet installers, trim carpenters, remodelers, flooring installers, and serious DIY users who care how the edge looks after the cut. If you cut veneered plywood, melamine, laminate, molding, or finish-grade wood and you want cleaner results from a 7-1/4 inch circular saw, the Diablo D0760A 7-1/4 in. x 60-Tooth Ultra Finish Saw Blade makes a lot of sense.

Built for Clean Finish Work

This blade is set up for the kind of cuts where edge quality matters. When you're cutting prefinished material, veneered sheet goods, or trim pieces, a cleaner cut means less rework and a better final result.

• 60 ATB teeth for smooth crosscuts and finish-focused wood cutting
• Ideal for oak, pine, melamine, veneer plywood, laminate, fiber board, and delicate molding

What's in the Box

• (1) Diablo D0760A 7-1/4 in. x 60-Tooth Ultra Finish Saw Blade

Key Specifications

Compatibility

Saw Type Marked for use with corded and cordless circular saws. Blade Interface Fits saws that accept a 7-1/4 in. blade with a 5/8 in. arbor.

Built For

Carpentry Cabinet Installation Remodeling Trim and Molding Plywood Crosscutting Melamine Cutting Laminate Work Woodworking

Pro Tip

Use this blade when the cut edge needs to look finished, especially on melamine, veneer plywood, and trim. For rough framing or fast rip cuts in construction lumber, switch to a lower-tooth-count blade and save this one for the work where cut quality actually matters.

Tool Nut's Take

Tool Nut's Take

Diablo D0760A 7-1/4 in. x 60-Tooth Ultra Finish Saw Blade for cleaner finish cuts

This is the blade you keep around for plywood, trim, melamine, and other material where a rough edge is going to slow the whole job down.

• Who it's for: Trim carpenters, remodelers, cabinet installers, and DIY users who want a cleaner crosscut from a 7-1/4 in. circular saw.
• Why it stands out: The 60-tooth ultra finish setup, thin kerf, carbide construction, and anti-stick coating are all aimed at cut quality, not just getting through the material.
• Worth knowing: This is a finish blade first. It is a smarter pick for clean visible cuts than for rough high-speed framing work.

Common Questions

• What materials is this blade made to cut? It is designed for wood cutting and is specifically described as ideal for crosscutting oak, pine, melamine, veneer plywood, laminate, fiber board, and delicate molding.
• What size saw does this blade fit? It is a 7-1/4 in. blade with a 5/8 in. arbor, so it fits circular saws that use that blade size and arbor size.
• Is this blade better for ripping or finish cuts? This is an ultra finish blade with 60 teeth, so it is geared toward cleaner crosscuts and finish work rather than rough ripping.
• What is the maximum blade speed rating? The maximum rated speed is 8,000 RPM.