Description:

Key Features

Gets Into Tight Spots The multi-head setup gives you four dedicated attachment options, so you can drill and drive where a standard drill just does not fit. Brushless Efficiency The brushless motor helps this cordless drill/driver deliver solid runtime and consistent performance without adding bulk. Compact With Control At less than 5 inches long with 2 speeds and 15 clutch settings, this DEWALT drill/driver kit is built for controlled fastening and small-hole drilling in finished spaces.

Overview

The DEWALT DCD703F1 12V MAX 5-in-1 Brushless Drill/Driver Kit is a compact cordless drilling and fastening solution for pros and serious DIY users who need access more than raw size. This is a drill/driver designed for drilling small holes and driving fasteners in tight spaces. Model Number: DCD703F1.

What makes this kit different is the 5-in-1 setup. The base tool works with four dedicated attachments: a 3/8 inch ratcheting chuck attachment for standard drill and driver work, a 1/4 inch hex right angle attachment for confined spaces, a 1/4 inch hex quick release attachment for one-handed bit changes, and a 1/4 inch hex quick release offset attachment for corners and edge work. That gives you one compact platform that can handle cabinet installs, electrical trim-out, hardware mounting, service work, and punch-list jobs without dragging in a bigger drill.

The compact size matters here. DEWALT lists the tool at less than 5 inches long and 1.6 lbs without battery or attachments, which is exactly why this tool earns its keep in cramped spots. If you are working inside a sink base, between studs, inside a panel cavity, or up in a mechanical room, shorter length means straighter access and less knuckle-busting. The built-in 1/4 inch hex magnetic bit holder also keeps a driver bit close by without making the tool bulky.

Performance is matched to the job, not inflated on paper. The brushless motor is there for efficiency and runtime, and the 2-speed transmission gives you a 0-425 / 0-1,500 RPM range. Low speed helps with controlled fastening, while high speed is better for drilling small pilot holes and general light-duty drilling. Add in 15 clutch settings and you get much better control when you are working around finished materials, small screws, hinges, device boxes, and hardware that can be easy to strip with a more aggressive drill.

Jobsite practicality is solid for a sub-compact tool. The LED foot light helps when you are working in cabinets, closets, under counters, or anywhere overhead lighting is not helping. The belt hook is simple but useful when you are moving up and down a ladder or bouncing between tasks. The chuck is keyless, so swapping accessories is straightforward, and the quick release hex setup speeds up repetitive fastening work.

This kit runs on the DEWALT 12V MAX battery platform and includes a 2.0Ah battery and charger, so you can get to work right away. That makes it a good fit for buyers who want a complete compact drill driver kit instead of a bare tool. If your work leans toward finish carpentry, electrical, HVAC service, low-voltage installs, cabinet work, fixture installation, or everyday repair tasks, this is the kind of tool that gets used more often than the bigger drill because it actually fits where the work is.

Reach Tight Corners Without Fighting the Tool

This platform is built around access. Instead of forcing a full-size drill into a bad angle, you swap to the attachment that fits the space and keep moving.

• Includes right angle, quick release, offset, and 3/8 inch chuck attachments
• Tool length is under 5 inches for better clearance in cabinets and corners

Better Control for Small Fasteners and Pilot Holes

Compact does not mean sloppy. The 2-speed transmission and 15 clutch settings give you the control needed for finish work and light service tasks where overdriving screws creates more work.

• 2 speed range: 0-425 / 0-1,500 RPM
• 15 clutch settings help dial in repeatable fastening performance

Useful in Dark Cabinets and Service Areas

The LED foot light is one of those features you stop thinking about until you have to work under a sink or inside a dim utility area. Then it saves time immediately.

• LED foot light helps light the work area without a separate flashlight
• Belt hook keeps the tool close during ladder work and service calls

What's in the Box

• (1) DCD703 XTREME 12V MAX 5-in-1 Drill/Driver
• (1) DCB122 12V MAX 2.0Ah Battery
• (1) DCB112 Charger
• (1) 3/8 inch Chuck Attachment
• (1) 1/4 inch Hex Right Angle Attachment
• (1) 1/4 inch Hex Quick Release Attachment
• (1) 1/4 inch Hex Quick Release Offset Attachment
• (1) Belt Hook
• (1) Kit Bag

Key Specifications

Compatibility

Battery Platform Works on the DEWALT 12V MAX battery platform. Charger Includes a DCB112 charger for the included 12V MAX 2.0Ah battery. Bit Interface Supports 1/4 inch hex accessory bits through the quick release, offset, and right angle attachments.

Built For

Electrical HVAC Cabinet Installation Finish Carpentry Service Work General Repairs

Pro Tip

If you are installing hardware inside a cabinet or close to a wall, start with the offset attachment before reaching for the right angle head. It lets you stay tighter to edges and corners while keeping the bit lined up better on the screw.

Warranty & Support

3 Year Limited Warranty, 1 Year Free Service, 90 Day Satisfaction Guaranteed.

Tool Nut's Take

Tool Nut's Take

DEWALT DCD703F1 12V MAX 5-in-1 Brushless Drill/Driver Kit for tight-space work

This is the kind of compact drill/driver kit that earns a permanent spot in the truck because it solves access problems fast.

• Who it's for: Electricians, HVAC techs, finish carpenters, installers, and anyone doing fastening or pilot-hole work in cramped spaces.
• Why it stands out: The attachment system is the whole story here. You get real tight-access capability without carrying separate specialty tools.
• Worth knowing: This is a control-and-access tool, not a heavy-duty hole hog. For small fasteners, punch work, and install jobs, that is exactly why it works so well.

Common Questions

• Is this a brushless drill/driver? Yes. The DCD703F1 uses a brushless motor for improved efficiency and runtime.
• What speed range does it have? It has a 2-speed transmission with a no-load speed range of 0-425 RPM and 0-1,500 RPM.
• How many clutch settings does it offer? It has 15 clutch settings for better control when driving fasteners.
• Does it include a battery and charger? Yes. This kit includes one 12V MAX 2.0Ah battery and a charger.