Description:

Bostik Born2BondTM Threadlocking anaerobic adhesives provide single-component, one-stop solutions for all threadlocking requirements, including preventive maintenance. Eliminating the cost and inconvenience of holding extensive inventory, these liquid adhesives fill and seal all voids to achieve a cohesive connecton of metal parts that remains fixed even when subjected to extreme vibrations, temperatures or chemical substances.

TA-70 is a general purpose high strength anaerobic adhesive designed to lock and seal threaded fasteners which require permanent assembly. Once cured the product prevents leakage and/or loosening of parts from vibration and shock.

This product is acceptable as a thread locking compound in and around food processing areas according to NSF S6 (Registration No.163872).

KEY FEATURES

• High strength
• Medium viscosity
• 100% connection - no loosening
• Recommended for threads up to M20
• Evenly distribute force
• Vibration resistant
• Corrosion prevention
• Single component
• Suitable for active and passive metals

DIRECTIONS FOR USE

1. For best results, clean all surfaces (internal and external) with Born2BondTM Pre-Bonding Cleaner and wait until fully evaporated.
2. If the cure speed is too slow, use Born2BondTM Anaerobic Activator.
3. Shake the product before use.
4. Apply adhesive onto threads.
5. Assemble and tighten as required.

METHOD OF USE

Manual: Directly from the bottle with or without dispensing tips for more precise dispensing.

Semi-Automated: Use of pressure-time systems for accurate volume and larger series.

Full-Automated: fully automated robot or application lines

APPLICATIONS

• Mechanical parts assembly
• Machine engineering
• Gear manufacturing
• Engines and powertrains

STORAGE/SHELF LIFE

Store product in the unopened container in a dry area out of direct sunlight. Storage below 7C or greater than 28C can adversely affect product performance. If stored properly, this product has a shelf life of 24 months.

HEALTH/SAFETY

The Safety Data Sheet is available on the Bostik website and should be consulted for proper handling, cleanup and spill containment before use. Keep containers covered to minimize contamination.

LIMITATIONS

This product is not recommended for use in pure oxygen and/or oxygen-rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials. Material removed from containers may be contaminated during use. Do not return product to the original container. Bostik will not assume responsibility for product that has been contaminated or stored under conditions other than those previously indicated. If additional information is required, please contact your local Technical Service Center or customer service representative.

MRO Solutions Guide