Description:

Key Features

Ratcheting PunchThe FastCap Hole Punch Pro Kit uses a ratcheting manual punch with an ejector pin, so punching and clearing screw covers takes less hand effort.Covers From Your Own BandingPunch screw covers from the same edge banding or veneer used on the job for an exact color and grain match.Carbide Cutters IncludedAdds 3/8-inch and 18 mm carbide cutters to the FlushMount drill bit system, PowerHead screws and SpeedTape.

Overview

The FastCap Hole Punch Pro Kit (Model Number: HOLE PUNCH PRO KIT) is the professional version of FastCap's custom screw cover system. This is a manual ratcheting hole punch designed for cutting screw covers from your own edge banding or veneer so screw heads in cabinets and casework disappear.

The punch is ratcheting, with an ejector pin to push out the finished cover, a replaceable bushing and interchangeable dies. Three precision steel dies are included: 3/8 inch, 9/16 inch and 18 mm. It handles material up to 0.022 inch thick and is not intended for plastic laminate.

The FlushMount drill bit system creates a hole sized and deep enough for a PowerHead screw and its cap to sit flush. The Pro kit also includes 3/8-inch and 18 mm carbide cutters and a 1-inch x 50-foot roll of SpeedTape high-strength double-sided tape for attaching the covers.

Everything packs into a blow-molded case. Cabinet shops and installers who cover screws on every job will get the most from the Pro kit over the standard Hole Punch Kit.

What's in the Box

• (1) Ratcheting hole punch tool with extra bushing
• (1) 3/8 in. die
• (1) 9/16 in. die
• (1) 18 mm die
• (1) FlushMount drill bit system
• 3/8 in. and 18 mm carbide cutters
• PowerHead screws
• (1) Roll SpeedTape, 1 in. x 50 ft.
• (1) Blow-molded case

Key Specifications

Built For

Cabinet InstallationCabinet MakingCloset SystemsFurniture BuildingWoodworking

Tool Nut's Take

Tool Nut's Take

The Shop-Grade Screw Cover System

The FastCap Hole Punch Pro Kit is the version to buy if you punch screw covers on every install.

• Who it's for: Cabinet and closet shops covering screws daily.
• Why it stands out: Ratcheting punch with ejector pin plus carbide cutters, beyond what the standard kit includes.
• Worth knowing: Same 0.022-inch material limit as the standard kit, and no plastic laminate.