Description:

• Design flexibility permitted for sustained load performance at elevated temperature
• Jobsite versatility can be specified for dry and damp conditions when in-service temperatures range from 40F (40C) to 150F (65C)
• Recognized per AC308 to be used for rebar development and splice length design provisions of ACI 318
• Suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry
• Easy hole cleaning no power-brushing required
• Manufactured in the USA using global materials
• 56-oz. side-by-side cartridge
• Tested in accordance with ICC-ES AC308 (ESR-2508), AC58 (ER-265), ACI 355.4 and applicable ASTM test methods and compliant with NSF/ANSI Standard 61
• Approved for installation with vacuum-drill bit system without further hole cleaning; see Code Report (ESR-2508) for approved system

Simpson Strong-Tie SET-XP is an epoxy-based, high-strength anchoring adhesive suitable for use in dry or water-saturated concrete and masonry applications. This 1:1 ratio, two-component, high-solids adhesive is formulated for anchoring and doweling into concrete (cracked and uncracked) and masonry (uncracked) applications with threaded rod and rebar. SET-XP is a uniform teal color when mixed properly and has a substrate installation temperature range from 50F (10C) to 110F (38C).

• Design flexibility permitted for sustained load performance at elevated temperature
• Jobsite versatility can be specified for dry and damp conditions when in-service temperatures range from 40F (40C) to 150F (65C)
• Recognized per AC308 to be used for rebar development and splice length design provisions of ACI 318
• Suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry
• Easy hole cleaning no power-brushing required
• Manufactured in the USA using global materials
• 56-oz. side-by-side cartridge
• Tested in accordance with ICC-ES AC308 (ESR-2508), AC58 (ER-265), ACI 355.4 and applicable ASTM test methods and compliant with NSF/ANSI Standard 61
• Approved for installation with vacuum-drill bit system without further hole cleaning; see Code Report (ESR-2508) for approved system

Install With: Install using the EDTA56P dispensing tool and EMN22i mixing nozzle